nissei-arcotronics r60 bulk taped fig. 1 fig. 2 p = 10 p > 10 ?d 0.05 0.6 0.8 fig. 1 fig. 2 p 2 (mm) 12.7 19.05 all dimensions are in mm. mkt series metallized polyester film capacitor multipurpose applications typical application: blocking, coupling, decoupling, by- passing, interference suppression in low voltage applications (i.e.: automotive). series code: r60 note: special version, in compliance with din 44122, is available upon request. construction: ? stacked technology for 10 mm lead spacing (rated voltage from 63 to 630vdc) ? wound technology from 10 to 27.5mm lead spacing (rated voltage from 63 to 1000vdc) part numbering system 1 2 3 4 5 6 7 8 9 [ ] 1. series code 2. capacitance value in pico farads. first 2 digits are significant and 3 rd digit indicates number of zeros. 3. capacitance tolerance j = 5% k = 10% m = 20% 4. d.c. voltage 5. packaging code b = bulk a = ammo r = reel 6. lead spacing (mm) f = 10 i = 15 n = 22.5 r = 27.5 w = 37.5 7. lead length (mm) ? (applies to bulk packaging only. omit for standard lead length 4-6mm.) l = 15 min. t = 3.5-4.0 v = 2.7-3.3 8. construction (omit for wound construction) q = stacked version 9. internal code general technical data dielectric: polyester film (polyethylene terephthalate). plates: aluminum layer deposited by evaporation under vacuum winding: non-inductive type leads: tinned wire protection: plastic case, epoxy resin filled. box material is solvent resistant and flame retardant according to ul94 v0 marking: manufacturer?s logo, capacitance, tolerance, d.c. voltage climatic category: 55/100/56 iec 60068-1 operating temperature range: -55 to +105 c for stacked technology an upper operating temperature of +125c is allowed for a max. operating time of 1000h. related documents: iec 60384-2; cecc 30400 winding scheme r 6 0 single sided metallized polyester film
nissei-arcotronics r60 mkt series metallized polyester film capacitor multipurpose applications series code: r60 stacked version all dimensions are in mm. rated cap. 63vdc/40vac max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 1.0 f 4.0 9.0 13.0 10.0 50 6.3 e3 r60105-63-f-q 1.5 f 5.0 11.0 13.0 10.0 50 6.3 e3 r60155-63-f-q 2.2 f 5.0 11.0 13.0 10.0 50 6.3 e3 r60225-63-f-q 3.3 f 6.0 12.0 13.0 10.0 50 6.3 e3 r60335-63-f-q rated cap. 100vdc/63vac max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.33 f 4.0 9.0 13.0 10.0 75 15 e3 r60334-100-f-q 0.47 f 4.0 9.0 13.0 10.0 75 15 e3 r60474-100-f-q 0.68 f 4.0 9.0 13.0 10.0 75 15 e3 r60684-100-f-q 1.0 f 5.0 11.0 13.0 10.0 75 15 e3 r60105-100-f-q 1.5 f 5.0 11.0 13.0 10.0 75 15 e3 r60155-100-f-q rated cap. 160vdc/90vac max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.22 f 4.0 9.0 13.0 10.0 100 32 e3 r60224-160-f-q 0.33 f 4.0 9.0 13.0 10.0 100 32 e3 r60334-160-f-q 0.47 f 5.0 11.0 13.0 10.0 100 32 e3 r60474-160-f-q 0.68 f 6.0 12.0 13.0 10.0 100 32 e3 r60684-160-f-q tolerance: j ( 5%); k ( 10%); m ( 20%) packaging code: b (bulk); a (ammo); r (reel) lead length (mm): l (24-27); t (3.5-4.0); v (2.7-3.3) omit for standard (4-6) rated cap. 250vdc/160vac max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.10 f 4.0 9.0 13.0 10.0 150 75 e3 r60104-250-f-q 0.15 f 4.0 9.0 13.0 10.0 150 75 e3 r60154-250-f-q 0.22 f 5.0 11.0 13.0 10.0 150 75 e3 r60224-250-f-q 0.33 f 5.0 11.0 13.0 10.0 150 75 e3 r60334-250-f-q 0.47 f 6.0 12.0 13.0 10.0 150 75 e3 r60474-250-f-q rated cap. 400vdc/200vac max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.033 f 4.0 9.0 13.0 10.0 175 140 e3 r60333-400-f-q 0.047 f 4.0 9.0 13.0 10.0 175 140 e3 r60473-400-f-q 0.068 f 4.0 9.0 13.0 10.0 175 140 e3 r60683-400-f-q 0.10 f 5.0 11.0 13.0 10.0 175 140 e3 r60104-400-f-q 0.15 f 6.0 12.0 13.0 10.0 175 140 e3 r60154-400-f-q rated cap. 630vdc/220vac max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 1000 f 4.0 9.0 13.0 10.0 200 250 e3 r60102-630-f-q 1500 f 4.0 9.0 13.0 10.0 200 250 e3 r60152-630-f-q 2200 f 4.0 9.0 13.0 10.0 200 250 e3 r60222-630-f-q 3300 f 4.0 9.0 13.0 10.0 200 250 e3 r60332-630-f-q 4700 f 4.0 9.0 13.0 10.0 200 250 e3 r60472-630-f-q 6800 f 4.0 9.0 13.0 10.0 200 250 e3 r60682-630-f-q 0.010 f 4.0 9.0 13.0 10.0 200 250 e3 r60103-630-f-q 0.015 f 4.0 9.0 13.0 10.0 200 250 e3 r60153-630-f-q 0.022 f 4.0 9.0 13.0 10.0 200 250 e3 r60223-630-f-q 0.033 f 5.0 11.0 13.0 10.0 200 250 e3 r60333-630-f-q 0.047 f 5.0 11.0 13.0 10.0 200 250 e3 r60473-630-f-q tolerance: j ( 5%); k ( 10%); m ( 20%) packaging code: b (bulk); a (ammo); r (reel) lead length (mm): l (24-27); t (3.5-4.0); v (2.7-3.3) omit for standard (4-6) note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplyi ng the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. in progress
nissei-arcotronics r60 mkt series metallized polyester film capacitor multipurpose applications series code: r60 wound version all dimensions are in mm. rated cap. 63vdc/40vac max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.47 f 4.0 9.0 13.0 10.0 6.0 0.75 e3 r60474-63-f- 0.68 f 4.0 9.0 13.0 10.0 6.0 0.75 e3 r60684-63-f- 1.0 f 5.0 11.0 13.0 10.0 6.0 0.75 e3 r60105-63-f- 1.5 f 6.0 12.0 13.0 10.0 6.0 0.75 e3 r60155-63-f- 0.68 f 5.0 11.0 18.0 15.0 2.5 0.32 e3 r60684-63-i- 1.0 f 5.0 11.0 18.0 15.0 2.5 0.32 e3 r60105-63-i- 1.5 f 5.0 11.0 18.0 15.0 2.5 0.32 e3 r60155-63-i- 2.2 f 6.0 12.0 18.0 15.0 2.5 0.32 e3 r60225-63-i- 3.3 f 7.5 13.5 18.0 15.0 2.5 0.32 e3 r60335-63-i- 4.7 f 8.5 14.5 18.0 15.0 2.5 0.32 e3 r60475-63-i- 6.8 f 10.0 16.0 18.0 15.0 2.5 0.32 e3 r60685-63-i- 3.3 f 6.0 15.0 26.5 22.5 1.5 0.19 e3 r60335-63-n- 4.7 f 7.0 16.0 26.5 22.5 1.5 0.19 e3 r60475-63-n- 6.8 f 7.0 16.0 26.5 22.5 1.5 0.19 e3 r60685-63-n- 10.0 f 8.5 17.0 26.5 22.5 1.5 0.19 e3 r60106-63-n- 10.0 f 9.0 17.0 32.0 27.5 1.0 0.13 e3 r60106-63-r- 15.0 f 11.0 20.0 32.0 27.5 1.0 0.13 e3 r60156-63-r- 22.0 f 13.0 22.0 32.0 27.5 1.0 0.13 e3 r60226-63-r- 33.0 f 14.0 28.0 32.0 27.5 1.0 0.13 e3 r60336-63-r- 47.0 f 18.0 33.0 32.0 27.5 1.0 0.13 e3 r60476-63-r- 68.0 f 22.0 37.0 32.0 27.5 1.0 0.13 e3 r60686-63-r- 22.0 f 11.0 22.0 41.5 37.5 0.8 0.10 e3 r60226-63-w- 33.0 f 13.0 24.0 41.5 37.5 0.8 0.10 e3 r60336-63-w- 47.0 f 16.0 28.5 41.5 37.5 0.8 0.10 e3 r60476-63-w- 68.0 f 19.0 32.0 41.5 37.5 0.8 0.10 e3 r60-686-63-w- 100.0 f 24.0 44.0 41.5 37.5 0.8 0.10 e3 r60-107-63-w- tolerance: j ( 5%); k ( 10%); m ( 20%) packaging code: b (bulk); a (ammo); r (reel) lead length (mm): l (24-27); t (3.5-4.0); v (2.7-3.3) omit for standard (4-6) rated cap. 100vdc/63vac max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.33 f 4.0 9.0 13.0 10.0 9.0 1.8 e3 r60334-100-f- 0.47 f 5.0 11.0 13.0 10.0 9.0 1.8 e3 r60474-100-f- 0.68 f 6.0 12.0 13.0 10.0 9.0 1.8 e3 r60684-100-f- 0.33 f 5.0 11.0 18.0 15.0 3.0 0.6 e3 r60334-100-i- 0.47 f 5.0 11.0 18.0 15.0 3.0 0.6 e3 r60474-100-i- 0.68 f 5.0 11.0 18.0 15.0 3.0 0.6 e3 r60684-100-i- 1.0 f 5.0 11.0 18.0 15.0 3.0 0.6 e3 r60105-100-i- 1.5 f 7.5 13.5 18.0 15.0 3.0 0.6 e3 r60155-100-i- 2.2 f 8.5 14.5 18.0 15.0 3.0 0.6 e3 r60225-100-i- 3.3 f 10.0 16.0 18.0 15.0 3.0 0.6 e3 r60335-100-i- 1.5 f 6.0 15.0 26.5 22.5 2.0 0.4 e3 r60155-100-n- 2.2 f 6.0 15.0 26.5 22.5 2.0 0.4 e3 r60225-100-n- 3.3 f 7.0 16.0 26.5 22.5 2.0 0.4 e3 r60335-100-n- 4.7 f 8.5 17.0 26.5 22.5 2.0 0.4 e3 r60475-100-n- 6.8 f 10.0 18.5 26.5 22.5 2.0 0.4 e3 r60685-100-n- 4.7 f 9.0 17.0 32.0 27.5 1.5 0.3 e3 r60475-100-r- 6.8 f 9.0 17.0 32.0 27.5 1.5 0.3 e3 r60685-100-r- 10.0 f 11.0 20.0 32.0 27.5 1.5 0.3 e3 r60106-100-r- 15.0 f 13.0 22.0 32.0 27.5 1.5 0.3 e3 r60156-100-r- 22.0 f 14.0 28.0 32.0 27.5 1.5 0.3 e3 r60226-100-r- 33.0 f 18.0 33.0 32.0 27.5 1.5 0.3 e3 r60336-100-r- 47.0 f 22.0 37.0 32.0 27.5 1.5 0.3 e3 r60476-100-r- 15.0 f 11.0 22.0 41.5 37.5 1.0 0.2 e3 r60156-100-w- 22.0 f 13.0 24.0 41.5 37.5 1.0 0.2 e3 r60226-100-w- 33.0 f 16.0 28.5 41.5 37.5 1.0 0.2 e3 r60336-100-w- 47.0 f 19.0 32.0 41.5 37.5 1.0 0.2 e3 r60476-100-w- 68.0 f 24.0 44.0 41.5 37.5 1.0 0.2 e3 r60686-100-w- tolerance: j ( 5%); k ( 10%); m ( 20%) packaging code: b (bulk); a (ammo); r (reel) lead length (mm): l (24-27); t (3.5-4.0); v (2.7-3.3) omit for standard (4-6) note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying t he above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table.
nissei-arcotronics r60 mkt series metallized polyester film capacitor multipurpose applications series code: r60 wound version all dimensions are in mm. rated cap. 160vdc/90vac max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.22 f 4.0 9.0 13.0 10.0 15.0 4.80 e3 r60224-160-f- 0.33 f 5.0 11.0 13.0 10.0 15.0 4.80 e3 r60334-160-f- 0.47 f 6.0 12.0 13.0 10.0 15.0 4.80 e3 r60474-160-f- 0.33 f 5.0 11.0 18.0 15.0 9.0 2.90 e3 r60334-160-i- 0.47 f 5.0 11.0 18.0 15.0 9.0 2.90 e3 r60474-160-i- 0.68 f 5.0 11.0 18.0 15.0 9.0 2.90 e3 r60684-160-i- 1.0 f 7.5 13.5 18.0 15.0 9.0 2.90 e3 r60105-160-i- 1.5 f 8.5 14.5 18.0 15.0 9.0 2.90 e3 r60155-160-i- 2.2 f 10.0 16.0 18.0 15.0 9.0 2.90 e3 r60225-160-i- 1.5 f 6.0 15.0 26.5 22.5 5.5 1.70 e3 r60155-160-n- 2.2 f 7.0 16.0 26.5 22.5 5.5 1.70 e3 r60225-160-n- 3.3 f 8.5 17.0 26.5 22.5 5.5 1.70 e3 r60335-160-n- 4.7 f 11.0 20.0 26.5 22.5 5.5 1.70 e3 r60475-160-n- 3.3 f 9.0 17.0 32.0 27.5 3.0 0.96 e3 r60335-160-r- 4.7 f 9.0 17.0 32.0 27.5 3.0 0.96 e3 r60475-160-r- 6.8 f 11.0 20.0 32.0 27.5 3.0 0.96 e3 r60685-160-r- 10.0 f 15.0 24.5 32.0 27.5 3.0 0.96 e3 r60106-160-r- 15.0 f 18.0 33.0 32.0 27.5 3.0 0.96 e3 r60156-160-r- 22.0 f 22.0 37.0 32.0 27.5 3.0 0.96 e3 r60226-160-r- 10.0 f 11.0 22.0 41.5 37.5 2.0 0.64 e3 r60106-160-w- 15.0 f 13.0 24.0 41.5 37.5 2.0 0.64 e3 r60156-160-w- 22.0 f 16.0 28.5 41.5 37.5 2.0 0.64 e3 r60226-160-w- 33.0 f 19.0 32.0 41.5 37.5 2.0 0.64 e3 r60336-160-w- 47.0 f 24.0 44.0 41.5 37.5 2.0 0.64 e3 r60476-160-w- tolerance: j ( 5%); k ( 10%); m ( 20%) packaging code: b (bulk); a (ammo); r (reel) lead length (mm): l (24-27); t (3.5-4.0); v (2.7-3.3) omit for standard (4-6) rated cap. 250vdc/160vac max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.068 f 4.0 9.0 13.0 10.0 20 10.0 e3 r60683-250-f- 0.10 f 4.0 9.0 13.0 10.0 20 10.0 e3 r60104-250-f- 0.15 f 4.0 9.0 13.0 10.0 20 10.0 e3 r60154-250-f- 0.22 f 5.0 11.0 13.0 10.0 20 10.0 e3 r60224-250-f- 0.33 f 6.0 12.0 13.0 10.0 20 10.0 e3 r60334-250-f- 0.10 f 5.0 11.0 18.0 15.0 12 6.0 e3 r60104-250-i- 0.15 f 5.0 11.0 18.0 15.0 12 6.0 e3 r60154-250-i- 0.22 f 5.0 11.0 18.0 15.0 12 6.0 e3 r60224-250-i- 0.33 f 5.0 11.0 18.0 15.0 12 6.0 e3 r60334-250-i- 0.47 f 6.0 12.0 18.0 15.0 12 6.0 e3 r60474-250-i- 0.68 f 7.5 13.5 18.0 15.0 12 6.0 e3 r60684-250-i- 1.0 f 8.5 14.5 18.0 15.0 12 6.0 e3 r60105-250-i- 1.5 f 10.0 16.0 18.0 15.0 12 6.0 e3 r60155-250-i 0.47 f 6.0 15.0 26.5 22.5 8 4.0 e3 r60474-250-n- 0.68 f 6.0 15.0 26.5 22.5 8 4.0 e3 r60684-250-n- 1.0 f 6.0 15.0 26.5 22.5 8 4.0 e3 r60105-250-n- 1.5 f 7.0 16.0 26.5 22.5 8 4.0 e3 r60155-250-n- 2.2 f 10.0 18.5 26.5 22.5 8 4.0 e3 r60225-250-n- 3.3 f 11.0 20.0 26.5 22.5 8 4.0 e3 r60335-250-n- 1.5 f 9.0 17.0 32.0 27.5 5 2.5 e3 r60155-250-r- 2.2 f 9.0 17.0 32.0 27.5 5 2.5 e3 r60225-250-r- 3.3 f 11.0 20.0 32.0 27.5 5 2.5 e3 r60335-250-r- 4.7 f 13.0 22.0 32.0 27.5 5 2.5 e3 r60475-250-r- 6.8 f 14.0 28.0 32.0 27.5 5 2.5 e3 r60685-250-r- 10.0 f 18.0 33.0 32.0 27.5 5 2.5 e3 r60106-250-r- 15.0 f 22.0 37.0 32.0 27.5 5 2.5 e3 r60156-250-r- 4.7 f 11.0 22.0 41.5 37.5 4 2.0 e3 r60475-250-w- 6.8 f 13.0 24.0 41.5 37.5 4 2.0 e3 r60685-250-w- 10.0 f 16.0 28.5 41.5 37.5 4 2.0 e3 r60106-250-w- 15.0 f 19.0 32.0 41.5 37.5 4 2.0 e3 r60156-250-w- 22.0 f 20.0 40.0 41.5 37.5 4 2.0 e3 r60226-250-w- 33.0 f 24.0 44.0 41.5 37.5 4 2.0 e3 r60336-250-w- tolerance: j ( 5%); k ( 10%); m ( 20%) packaging code: b (bulk); a (ammo); r (reel) lead length (mm): l (24-27); t (3.5-4.0); v (2.7-3.3) omit for standard (4-6) note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying t he above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table.
nissei-arcotronics r60 mkt series metallized polyester film capacitor multipurpose applications series code: r60 wound version all dimensions are in mm. rated cap. 400vdc/200vac max dv/dt max k 0 part number b h l p b h 0.015 f 4.0 9.0 13.0 10.0 30.0 24.0 e3 r60153-400-f- 0.022 f 4.0 9.0 13.0 10.0 30.0 24.0 e3 r60223-400-f- 0.033 f 4.0 9.0 13.0 10.0 30.0 24.0 e3 r60333-400-f- 0.047 f 4.0 9.0 13.0 10.0 30.0 24.0 e3 r60473-400-f- 0.068 f 5.0 11.0 13.0 10.0 30.0 24.0 e3 r60683-400-f- 0.10 f 6.0 12.0 13.0 10.0 30.0 24.0 e3 r60104-400-f- 0.047 f 5.0 11.0 18.0 15.0 20.0 16.0 e3 r60473-400-i- 0.068 f 5.0 11.0 18.0 15.0 20.0 16.0 e3 r60683-400-i- 0.10 f 5.0 11.0 18.0 15.0 20.0 16.0 e3 r60104-400-i- 0.15 f 5.0 11.0 18.0 15.0 20.0 16.0 e3 r60154-400-i- 0.22 f 6.0 12.0 18.0 15.0 20.0 16.0 e3 r60224-400-i- 0.33 f 7.5 13.5 18.0 15.0 20.0 16.0 e3 r60334-400-i- 0.47 f 8.5 14.5 18.0 15.0 20.0 16.0 e3 r60474-400-i- 0.22 f 6.0 15.0 26.5 22.5 10.0 8.0 e3 r60224-400-n- 0.33 f 6.0 15.0 26.5 22.5 10.0 8.0 e3 r60334-400-n- 0.47 f 6.0 15.0 26.5 22.5 10.0 8.0 e3 r60474-400-n- 0.68 f 7.0 16.0 26.5 22.5 10.0 8.0 e3 r60684-400-n- 1.0 f 10.0 18.5 26.5 22.5 10.0 8.0 e3 r60105-400-n- 1.5 f 11.0 20.0 26.5 22.5 10.0 8.0 e3 r60155-400-n- 0.68 f 9.0 17.0 32.0 27.5 8.5 3.4 e3 r60684-400-r- 1.0 f 9.0 17.0 32.0 27.5 8.5 3.4 e3 r60105-400-r- 1.5 f 10.0 20.0 32.0 27.5 8.5 3.4 e3 r60155-400-r- 2.2 f 13.0 22.0 32.0 27.5 8.5 3.4 e3 r60225-400-r- 3.3 f 14.0 28.0 32.0 27.5 8.5 3.4 e3 r60335-400-r- 4.7 f 18.0 33.0 32.0 27.5 8.5 3.4 e3 r60475-400-r- 6.8 f 22.0 37.0 32.0 27.5 8.5 3.4 e3 r60685-400-r- 3.3 f 11.0 22.0 41.5 37.5 6.0 2.4 e3 r60335-400-w- 4.7 f 13.0 24.0 41.5 37.5 6.0 2.4 e3 r60475-400-w- 6.8 f 16.0 28.5 41.5 37.5 6.0 2.4 e3 r60685-400-w- 10.0 f 19.0 32.0 41.5 37.5 6.0 2.4 e3 r60106-400-w- 15.0 f 24.0 44.0 41.5 37.5 6.0 2.4 e3 r60156-400-w- tolerance: j ( 5%); k ( 10%); m ( 20%) packaging code: b (bulk); a (ammo); r (reel) lead length (mm): l (24-27); t (3.5-4.0); v (2.7-3.3) omit for standard (4-6) * not suitable for across-the-line applications. please refer to interference suppression capacitors. rated cap. 630vdc/220vac* max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 4700 f 4.0 9.0 13.0 10.0 40 50 e3 r60472-630-f- 6800 f 4.0 9.0 13.0 10.0 40 50 e3 r60682-630-f- 0.010 f 4.0 9.0 13.0 10.0 40 50 e3 r60103-630-f- 0.015 f 4.0 9.0 13.0 10.0 40 50 e3 r60153-630-f- 0.022 f 5.0 11.0 13.0 10.0 40 50 e3 r60223-630-f- 0.033 f 6.0 12.0 13.0 10.0 40 50 e3 r60333-630-f- 0.047 f 6.0 12.0 13.0 10.0 40 50 e3 r60473-630-f- 0.033 f 5.0 11.0 18.0 15.0 25 31 e3 r60333-630-i- 0.047 f 5.0 11.0 18.0 15.0 25 31 e3 r60473-630-i- 0.068 f 6.0 12.0 18.0 15.0 25 31 e3 r60683-630-i- 0.10 f 7.5 13.5 18.0 15.0 25 31 e3 r60104-630-i- 0.15 f 8.5 14.5 18.0 15.0 25 31 e3 r60154-630-i- 0.10 f 6.0 15.0 26.5 22.5 12 15 e3 r60104-630-n- 0.15 f 6.0 15.0 26.5 22.5 12 15 e3 r60154-630-n- 0.22 f 7.0 16.0 26.5 22.5 12 15 e3 r60224-630-n- 0.33 f 10.0 18.5 26.5 22.5 12 15 e3 r60334-630-n- 0.33 f 9.0 17.0 32.0 27.5 10 12 e3 r60334-630-r- 0.47 f 11.0 20.0 32.0 27.5 10 12 e3 r60474-630-r- 0.68 f 13.0 22.0 32.0 27.5 10 12 e3 r60684-630-r- 1.0 f 14.0 28.0 32.0 27.5 10 12 e3 r60105-630-r- 1.5 f 18.0 33.0 32.0 27.5 10 12 e3 r60155-630-r- 2.2 f 22.0 37.0 32.0 27.5 10 12 e3 r60225-630-r- 1.0 f 11.0 22.0 41.5 37.5 8 9.6 e3 r60105-630-w- 1.5 f 13.0 24.0 41.5 37.5 8 9.6 e3 r60155-630-w- 2.2 f 16.0 28.5 41.5 37.5 8 9.6 e3 r60225-630-w- 3.3 f 20.0 40.0 41.5 37.5 8 9.6 e3 r60335-630-w- 4.7 f 24.0 44.0 41.5 37.5 8 9.6 e3 r60475-630-w- tolerance: j ( 5%); k ( 10%); m ( 20%) packaging code: b (bulk); a (ammo); r (reel) lead length (mm): l (24-27); t (3.5-4.0); v (2.7-3.3) omit for standard (4-6) note 1: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying t he above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. note 2: rated voltages higher than 1000vdc are available upon request.
nissei-arcotronics r60 mkt series metallized polyester film capacitor multipurpose applications series code: r60 wound version all dimensions are in mm. * not suitable for across-the-line applications. please refer to interference suppression capacitors. rated cap. 1000vdc/250vac* max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 1000 f 4.0 9.0 13.0 10.0 60 120 e3 r60102-1000-f- 1500 f 4.0 9.0 13.0 10.0 60 120 e3 r60152-1000-f- 2200 f 4.0 9.0 13.0 10.0 60 120 e3 r60222-1000-f- 3300 f 4.0 9.0 13.0 10.0 60 120 e3 r60332-1000-f- 4700 f 5.0 11.0 13.0 10.0 60 120 e3 r60472-1000-f- 6800 f 6.0 12.0 13.0 10.0 60 120 e3 r60682-1000-f- 0.010 f 5.0 11.0 18.0 15.0 30 60 e3 r60103-1000-i- 0.015 f 6.0 12.0 18.0 15.0 30 60 e3 r60153-1000-i- 0.022 f 7.5 13.5 18.0 15.0 30 60 e3 r60223-1000-i- 0.033 f 8.5 14.5 18.0 15.0 30 60 e3 r60333-1000-i- 0.047 f 10.0 16.0 18.0 15.0 30 60 e3 r60473-1000-i- 0.033 f 6.0 15.0 26.5 22.5 15 30 e3 r60333-1000-n- 0.047 f 6.0 15.0 26.5 22.5 15 30 e3 r60473-1000-n- 0.068 f 8.5 17.0 26.5 22.5 15 30 e3 r60683-1000-n- 0.10 f 10.0 18.5 26.5 22.5 15 30 e3 r60104-1000-n- 0.15 f 9.0 17.0 32.0 27.5 12 24 e3 r60154-1000-r- 0.22 f 11.0 20.0 32.0 27.5 12 24 e3 r60224-1000-r- 0.33 f 13.0 22.0 32.0 27.5 12 24 e3 r60334-1000-r- 0.47 f 14.0 28.0 32.0 27.5 12 24 e3 r60474-1000-r- 0.68 f 18.0 33.0 32.0 27.5 12 24 e3 r60684-1000-r- 1.0 f 22.0 37.0 32.0 27.5 12 24 e3 r60105-1000-r- 0.47 f 11.0 22.0 41.5 37.5 10 20 e3 r60474-1000-w- 0.68 f 13.0 24.0 41.5 37.5 10 20 e3 r60684-1000-w- 1.0 f 16.0 28.5 41.5 37.5 10 20 e3 r60105-1000-w- 1.5 f 20.0 40.0 41.5 37.5 10 20 e3 r60155-1000-w- 2.2 f 24.0 44.0 41.5 37.5 10 20 e3 r60225-1000-w- tolerance: j ( 5%); k ( 10%); m ( 20%) packaging code: b (bulk); a (ammo); r (reel) lead length (mm): l (24-27); t (3.5-4.0); v (2.7-3.3) omit for standard (4-6) note 1: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying t he above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. note 2: rated voltages higher than 1000vdc are available upon request.
nissei-arcotronics r60 mkt series metallized polyester film capacitor multipurpose applications series code: r60 electrical characteristics rated voltage (v r ): 63vdc -100vdc - 160vdc - 250vdc 400vdc - 630vdc - 1000vdc rated temperature (t r ): +85 c voltage derating vs. temperature: for temperatures between +85 c and the upper operating temperature (+105 c for wound technology and +125c for stacked technology) a decreasing factor of 1.25% per c on the rated voltage v r has to be applied. capacitance range: stacked: 1000 f to 3.3 f wound: 1000 f to 100 f capacitance values: e6 series (iec 60063 norm) capacitance tolerances (measured at 1 khz) : 5% (j); 10% (k); 20% (m) total self-inductance (l) : (lead length ~2mm) pitch (mm) 10 15 22.5 27.5 37.5 l (nh) 9 10 18 18 22 dissipation factor (df): tg 10 -4 at +25 c 5 c khz c 1 f c > 1 f 1 10 100 150 100 insulation resistance: test conditions temperature: +25 c 5 c voltage charge time: 1 min voltage charge: 50vdc for v r <100vdc 100vdc for v r 100vdc performance for v r 100vdc 3750 m ? for c 0.33 f (50000 m ? ) * 1250 s for c > 0.33 f (5000 s) * for v r >100vdc 30000 m ? for c 0.33 f (50000 m ? ) * 10000 s for c > 0.33 f (17000 s) * * typical value test voltage between terminations: 1.6 v r applied for 2 s at +25 c 5 c test method and performance damp heat, steady state: test conditions temperature: +40 c 2 c relative humidity (rh): 93% 2% test duration: 56 days performance capacitance change ( ? c/c): 5% df change ( ? tg ): 50 10 -4 at 1khz insulation resistance: 50% of initial limit endurance: test conditions temperature: +100 c 2 c test duration: 2000 h voltage applied: 1.25 vc performance capacitance change ( ? c/c): 5% df change ( ? tg ): 50 10 -4 at 10khz for c 1 f 30 10 -4 at 0 1khz for c> 1 f insulation resistance: 50% of initial limit resistance to soldering heat: test conditions solder bath temperature: +260 c 5 c dipping time (with heat screen): 10 s 1 s performance capacitance change ( ? c/c): 2% df change ( ? tg ): 50 10- 4 at 10khz for c 1 f 30 10- 4 at 0 1khz for c > 1 f insulation resistance: initial limit long term stability (after two years) : storage: standard environmental conditions see general information section. performance capacitance change ( ? c/c): 3% for c 0.1 f 2% for c > 0.1 f reliability: reference mil hdb 217 application conditions: temperature: +40 c 2 c voltage: 0.5 v r failure rate: 5 fit (1 fit = 1 10 -9 failures/components h) failure criteria: (according to din 44122) short or open circuit capacitance change | ? c/c|: > 10% df change ( ? tg ): > 2 initial limit insulation resistance: <0.005 initial limit
nissei-arcotronics r60 mkt series metallized polyester film capacitor multipurpose applications series code: r60 max. voltage (vrms) versus frequency (sinusoidal waveform / t h 40 c) note: p (pitch) in mm
|
